GET How to make Galaxy S4 work with Pioneer radio. Switching selinux to permissive / Sudo Null IT News FREE

A year past, I became the prideful owner of the Innovator SPH-DA100 AppRadio 2

radio tape recorder . I bought the radio videotape recorder ab initio to unite a smartphone, because I longed-for to implement a sailing master with traffic jams, meet euphony from a phone, etc. But the chief goal naturally is Yandex.Navigator. At that fourth dimension, I was the proud owner of the Samsung Galax urceolata S3 I9300. Course, the supplied pioneer software immediately went to the trash and an fantabulous ARLiberator product was found . This political platform smartly allows you to control condition the phone from the wireles, displaying a full screen phone. ScreenStandby was added to it in order to foreclose the phone from discharging. To this was added the mhl adapter from the Samsung Beetleweed S4.

It is very important to use the original transcriber, Chinese adapters immediately begin to crash, snow and green the screen. Initially, I wanted to function Samsung's wireless AllShare Cast Dongle:

After lengthy tests, it turned out that if you open the navigator and turn connected the music at the same time, the link starts to fail and the songs stutter every 10-15 seconds. Well, for the work of Arliberator, you need Root. All this bunch worked perfectly and pleased me until a week past I skint my phone on the corner of the tiled floor. It was decided to switch to the Galaxy S4.

1. It was bought and flashed with the latest Samsung firmware supported android 4.4.2.
2. Received Root.

But nothing worked. Arliberator did not tie in to the machine, and could not pass the built-in carrying out tests. Particularly, the tryout "Creating a virtual twist" failed. After a long search, it turned unfashionable that in the new Android, the condition of SELinux was changed from a more free Soft to a strict Enforcing, which, successively, at that place are still restrictions with root. The setenforce 0 command did not help tack SELinux. Samsung also snapped their KNOX protection organisation. Altogether this was a definite plus for ordinary users, bringing Mechanical man in security department closer to iOS, but information technology did not satisfy my goals. After long searches and attempts, an algorithm was developed to get rid of this scourge. You can perform the described actions further at your own risk. The generator of the article is non responsible for turn your telephone set into a brick.

Yes, and other point: the very first firmware of something non-original causes the KNOX counter to fire, which cannot be reset at this time in any way. The operation of the heel counter, of course, causes the nullification of the Samsung warranty.

So,

1. The stock firmware with the cut out KNOX and the added Settle down (available on w3bsit3-dns.com) was flashed done ODIN 3.07 in the Personal digital assistant field. Execute non forget about completely the wipes, including factory reset.

To exchange SELinux, the single working means for ME was to update the modified kernel.

2. You postulate to dash CWM Recuperation. The wonted ROM Manager can not do here, because it does not make on the I9500:

a) Download recovery_version_.img from clockworkmod.com .
b) Rename the downloaded file to recovery.img
c) Pack it in a pitch image using TAR_MD5_PACKAGER (also on w3bsit3-dns.com). 7Zip did non help Hera.
d) Flash through ODIN in the PDA theatre of operations.

3. Install the Omega Files program and download the modified stock kernel for the I9500 victimisation it. The nitty-gritt is assembled from Samsung sources, at to the lowest degree the developer says so.

4. Flash downloaded archive via CWM without unpacking. Over again, not forgetting about wipes.

Every bit a result, almost neckcloth firmware was obtained with root and SELinux status - permissive.

The bundle ARLiberator + ScreenStandby was complemented by the superior Car Dashboard program , which replaces the Launcher for the duration of the connector and is expedient for poking while driving in the radio.

The algorithm I described is certainly compendious, but each of these actions is chewed on many resources, but I have not found much a combination anywhere. I hope this information volition be useful to those who are going to use this radio, as well as for those WHO have the desire to switch SELinux mode on the new Samsung.

A small summation about the replication:
Perhaps with the password counter I could be misleading. In fact, the retort was in front. In the I9500, this is already a flag that switches to 1 with unofficial intervention. Now John Knox software is responsible for for this, which is present not only in rom just also in the bootloader, and as ALIR every bit is better-known, it does not grant downgrading the bootloader at the ironware level.

DOWNLOAD HERE

GET How to make Galaxy S4 work with Pioneer radio. Switching selinux to permissive / Sudo Null IT News FREE

Posted by: whitneymusby2000.blogspot.com

Share this post